WATERPROOF ADHESIVE WITH INSTANT GRAB AND HOLD
Can be applied on dry or wet surfaces, even underwater. Solvent-free, paintable, and no run and drip for overhead applications. In squeeze tubes and cartridges. Available in white and crystal clear.
• Interior and exterior home repairs
• Seal out water and air
• Roof and siding repair
• Bath and shower fixes
• Shoe repair
• Furniture repairs
• DIY projects and hobbies
• Auto and boat repair
• RV and motor home repair
• Brick and stone bonding
Works on: Metals, wood, foam, rubber, tile, ceramic, marble, porcelain, glass, granite, brick, concrete, stucco, plaster, stone, masonry, drywall, sheetrock, fibreglass, some plastics & types of vinyl, composites, PVC, EPS, EPDM roofs and more.
THAT’S ALOTTA DAMAGE®
Fix it with FLEX GLUE®.
Available in white and clear.
Available in 4 oz clear squeeze tube, 6 oz white squeeze tube, 9 oz clear cartridge, 10 oz white cartridge.
Please note: a caulk gun is required to use Flex Glue cartridges.
Flex Glue works on:
Metals, wood, foam, rubber, tile, ceramic, marble, porcelain, glass, granite, brick, concrete, stucco, plaster, stone, masonry, drywall, sheetrock, fibreglass, some plastics & vinyl’s, composites, PVC, EPS, EPDM roofs and more.
*Review count based on 5-star amazon.com reviews, collected between May 2020 and May 2021, from US amazon.com
How To Use Flex Glue
Surface must be free of grease, oil and dirt. Unscrew the nozzle and cut opening large enough to ensure the product can be properly dispensed. Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take hold.
Allow 24-48 hours for curing. Will reach maximum strength in 7 days.
FLEX GLUE® Pro Formula (Caulk Gun Cartridge)
Surface must be free of grease, oil and dirt. Unscrew the nozzle and cut off tip, leaving thread intact. Replace nozzle and cut nozzle to the desired length. Insert cartridge into a standard size caulking gun and squeeze trigger. Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take hold.
In some applications, bracing may be required. If needed, you may reposition object within 10 minutes of application.
Fully cures in 12-24 hours and reaches maximum strength in 7 days.
After use, squeeze a small bead from the opening to form a plug. Simply cut the plug when you want to reuse.
WARNING: May cause an allergic skin reaction. Avoid contact with eyes and skin. Wear gloves and safety glasses. KEEP OUT OF REACH OF CHILDREN.
